• Pierre


Dernière mise à jour : 4 août 2019

02nd of November

After hours of measuring, thinking and research, I finally ordered the parts needed.

It is now time to disassemble the piano!

First slowly removing the tension on the strings. There are 222 strings on the Steinway O, with an overall tension of around 20 tons. Yes 20 tons! To avoid too much stress on the iron frame and the soundboard I removed the tension step by step. First by tuning down to a semi tone flat, then a few days later another semi tone...and so on until the whole tension was removed.

Meanwhile I could take it apart...

grand piano disassembling

8 vues0 commentaire

Posts récents

Voir tout

Steinway O restoration

5th of August This blog started 10 months ago. You are welcome to scroll down to the bottom of this page to read it in chronological order. My blog is not intended to be exhaustive but to share experi


July 2019 The piano is now restored. It has been tuned several time and some preliminary adjustments have been made so the piano is playable and start to settle. It can now be prepared. A piano prepar